|
The Fire-36 and Fire-18 amps both feature Zoom amp-modeling and multi-effects built-in to compact cabinets with solid power and great-sounding speakers.
|
 |
Zoom Amplifier Modeling
|
|
From vintage combo to modern high gain
amp sounds, Fire amps give you the tone you want at the turn of a knob. From
vintage tube, to acoustic, to solid state thrash metal-Zoom amps have it all.
A clean amp setting is also provided for use with your outboard effects and
pedals.
| MODELING TYPE |
| FDR BLUES / FDR CLEAN / J-CLEAN / MATCH / MS OLD / MS DRIVE / BG OLD / BG DRIVE / MP 1 / PVY / 9002 / Z-POWER / VINTAGE OD / TB DIST / WILD FUZZ / FUZZ / MTZ / MT 7 / AC FAT / AC STANDARD / VINTAGE PLAIN / STANDARD PLAIN |
|
|
|
|
Zoom Multi-Effects
|
|
A leader in effects processing for over
a decade, Fire amplifiers include a full complement of Zoom guitar effects.
Standards like Chorus, Flanger, Phase, Delay, and Reverb as well as modern
sounds like Ring Modulator and Slow Attack. There is a sound for every song.
And every effect can be adjusted in intensity.
|
|
EFFECT TYPE
CHORUS / FLANGER / PHASE
/ DOUBLING / TREMOLO / AUTO WAH / STEP / SLOW ATTACK / PITCH / RING MODULATOR
/ DELAY / ECHO / ROOM / HALL / ZNR / BOOST / SUSTAIN / EDGE / BOTTOM |
|
|
|
Store Your Effects
Settings |
|
Built-in memory allows you to save up
to 10 of your own effect combinations, or "patches". Recall any
setting anytime, including effects and amp models. Preset patches are also
built-in that simulate traditional amplifier tones. |
|
|
Delay / Reverb Control
|
|
The Fire-36 features an independent
control section for Delay and Reverb effects. A Type/Time control selects
the type and the duration of the effect. The corresponding Mix knob adjusts
the depth of the Delay or Reverb. |
|
|
Modulation Control
|
|
The Fire-36 also features a Modulation
control that allows the user to control the intensity of modulation effects
with the turn of a dial. |
|
|
Post-Effect Processing
|
|
Fire amps also offer four post-effect
processing tools: |
|
| BOOST
|
Raises the input signal, providing
deeper distortion and more SPL. |
| SUSTAIN
|
Adds depth and length with compression.
Great for leads. |
| EDGE
|
Emphasizing high frequencies for more
bite. |
| BOTTOM
|
Boosts low frequencies. Perfect for
7 string guitars.. |
|
|
|
Preamplifier Section
|
|
Control knobs allow you to adjust Level,
Gain and a three band EQ with Bass, Middle and Treble controls. |
|
|
Auto Chromatic Tuner
|
|
A built-in auto chromatic tuner allows
you to tune your guitar quickly and accurately. |
|
|
Foot Switch
|
|
Using the optional FS01 foot switch,
the user can switch between manual mode and program mode. Switch between a clean
sound for rhythm parts, and an overdrive tone for leads. |
|
|
 |
Foot Switch FS01
Unlatch and normally close type |
|
|
Zoom Noise Reduction
|
|
ZNR is Zoom's own noise reduction system.
It cleanly cuts out spurious noise during silences in your playing. ZNR is
adjustable in it's intensity, and can be turned on and off. |
|
|
Auxiliary Input
|
|
When Connecting CD player to AUX IN,
you can hear the CD playback and the sound of your guitar. This is a great
feature for rehearsing, or learning a guitar part. |
|
|
Direct Output
|
|
Plug in your headphones to the output
jack, or plug directly into a recording device using the convenient front
panel output jack. |
|
|
Power Damp Switch
|
|
The Fire-36 features a Power Damp switch
that lets you play at a low volume, without losing the sound of your selected
effects. |
|
|
SPECIFICATION
|
|
|
Power
Output |
Speaker |
Modeling
Type |
Effect
Program |
Effect
Module |
Patch
Memory |
| FIRE-18 |
18W RMS, 8 ohm |
8 inch
(20cm) |
22 |
19 |
7 |
30
(User 10/Preset 20) |
| FIRE-36 |
36W RMS, 5 ohm |
10 inch
(25cm) |
22 |
19 |
7 |
30
(User 10/Preset 20) |
|
|
|
Control : Gain, Bass, Middle, Treble, Level, Master
A/D Conversion : 20bit 64times over-sampling
D/A Conversion : 20bit 8times over-sampling
Sampling Frequency : 31.25kHz
Guitar Input : 1 x 1/4" Monaural Phone Jack (Nominal Input Level : -20dBm, Input Impedance : 470k ohm)
AUX Input : 1 x 1/4" Stereo Phone Jack (Nominal Input Level : -20dBm, Input Impedance : 10k ohm)
Recording/Headphone Output : 1 x 4" Stereo Phone Jack (Nominal Output Level : +4dBm at Load Impedance 10k ohm or more)
Control Input : Foot Switch (FS01)
Display : 2digit 7segment LED
Power Requirement : 100~240V, 50/60Hz
Supplied Accessory : Power Cable
Dimension : FIRE-18 / 400 (W) x 205 (D) x 380 (H) mm, FIRE-36 / 485 (W) x 240 (D) x 410 (H) mm
Weight : FIRE-18 / 10kg, FIRE-36 / 12kg
|
|
|
|
|
|
