Important notice about "All Initialize"

MRS-802/802CD The issue about "All Initialize" in HDD maintenance function

We confirmed the following cases in some of MRS-802/MRS-802CD.

Target Product	MRS-802/MRS-802CD with "SYSTEM Version 1.02 / CD Revision 1.3" *Please refer to the label of the supplied CD-ROM
Case	When executed "All Initialize" command in the HDD maintenance function (see page 137 of operation manual), it is going wrong in some of parameter of mixer / effect patches or it makes no sound on drum kit.

If you have the target product, please do not execute "All Initialize" command.
For customer who has already the above case and need the modification, please follow the procedure below.

For MRS-802CD user

Please perform HDD maintenance using the supplied CD-ROM. (See page 139 of operation manual)
*After your performance, please do not execute "All Initialize" command.

<In case you cannot perform HDD maintenance using the supplied CD-ROM>
We confirmed error on the supplied CD-ROM in some of production lot.
For details, please click here.

For MRS-802 user with UIB-01/02

1. Be in the online state, connecting the MRS-802 and computer with a USB cable.
2. Insert the supplied CD-ROM to CD-ROM/R/RW drive of computer.
3. Open the folder "USRDATA" in the supplied CD-ROM and copy "PRJINIT" and "SOUNDS" in it.

<In case you cannot find "SOUNDS" folder>
We confirmed error on the supplied CD-ROM in some of production lot.
For details, please click here.

4. Open "MRSSYS" folder of the volume "MRS-FAC", recognized as local disc and paste "PRJINIT" and "SOUNDS" being copied in procedure number 3.
5. Cancel the on-line state between the MRS-802 and computer.
6. Please execute "Factory Initialize" command. (See pages 137 and 138 of operation manual)

After that, new project must be created in normal setup.

*As "MRS-FAC" drive cannot be recognized at Mac OS9, you cannot recover the problem with the above procedure. Please contact our local distributor for the modification. All distributors are listed up on the CONTACT page.

For MRS-802 user without UIB-01/02

Please contact our local distributor for the modification. All distributors are listed up on the CONTACT page.