|
G2
|
|
| A: |
When the editing knob is at other than "PLAY", you are editing a specific patch, you cannot change to other patch. Please return the editing knob to "PLAY".
|
|
| A: |
The real-time control function of the effect parameter will become possible, using expression pedal FP01/FP02. For example, effects such as Wah or Pitch Shift can be operated by the pedal.
And Bypass/mute, Tap tempo, Bank up, Rhythm function on/off, Delay hold and Delay mute will become possible connecting foot switch FS01.
|
|
| A: |
Please adjust "PATCH LEVEL" parameter for each patch to keep the output level even. You can set up total patch level.
|
|
| A: |
Due to limitation of DSP resource, REVERB modules cannot be used in rhythm function.
|
|
| A: |
The patch level setting is made in play mode. Proceed as follows.
1. Set the module selector to "PLAY".
2. Turn parameter knob 3 to adjust the level to obtain a suitable volume.
3. Press the [STORE] key to save the setting.
|
|
| A: |
In patches where the DELAY module is ON, the TAP key will flash to indicate the currently set delay time. You can change the delay time by repeatedly pressing the TAP key.
|
|
| A: |
No, the unit does not have a patch preselect function.
|
|
|
|
|
Common Question