
|


Palmtop Studio PS-04
|
 |
| A: |
Depending on brands of SmartMedia card, following problems were confirmed.
- Cannot FORMAT
- Cannot RECORD or PLAY
Please use SmartMedia cards confirmed correct operation. For more details, pleaseclick here.
|
 |
| A: |
It depends on the capacity of SmartMedia. Please see below. The capacity of SmartMedia card supplied with PS-04 is 32MB.
| Capacity | Long mode | Hi-Fi mode |
| 16MB | 15min. | 7min. |
| 32MB | 32min. | 16min. |
| 64MB | 67min. | 33min. |
| 128MB | 134min. | 67min. |
|
 |
| A: |
Supplied SmartMedia with the PS-04 is 32MB, so total recording time is 16 minutes for all tracks (in Hi-Fi mode). It means that FULL will be displayed when you record 4 minutes for each tracks. If you use 128 MB SmartMedia, then recordable time is increased to 4 times more. Even if cost of SmartMedia is expensive, you can keep low running cost as follows;
1. Record completed data to DAT or Mini Disk. 2. Save data to computer by using card manager.
|
 |
| A: |
When the insert effect algorithm is "GUITAR/BASS", the built in mic cannot be used. (Except when the effect type "CABI" is selected in the PRE AMP/DRIVE module or when it is turned off) Please select another effect algorithm or bypass the insert effect.
|
 |
| A: |
There are 2 possible reasons.
(1) Effect algorithm is monaural input type. GUITAR or MIC effect algorithm cannot be used for stereo source. Please use another effect algorithm or bypass insert effect.
(2) The panning position is incorrect. To record stereo track correctly, set PAN parameter for Left channel to L100, and PAN parameter for Right channel to R100. Or please set the STEREO LINK function to ON.
|
 |
| A: |
Audio data on SmartMedia card saved by PS-02 can be loaded into PS-04. However, Rhythm and Effect data cannot be loaded. There is no compatibility with MRS-4 data.
|
 |
| A: |
"Card Manager" converts V-take data before signal processing by Send / Return effect and Track EQ. Please record audio data including Send / Return effect and Track EQ to any V-take, using "Bounce" function and convert it into WAV/AIFF file.
|
 |
| A: |
Please purchase SmartMedia reader/writer to import/export the data by SmartMedia. You can purchase it at the store which is selling computers or digital cameras. And please note that you need to download free software "Card Manager" from our website, which allows you to convert original compressed data format into WAV/AIFF format.
Link to DOWNLOAD page
|
 |
| A: |
Yes, it's possible. When you make audio CD, the sampling frequency of WAV/AIFF data must be 44.1kHz. Using "PS-04 Card Manager (File Manager)", you can convert audio data into stereo WAV/AIFF file in 44.1kHz sampling.
|
 |
| A: |
We are pleased to introduce the following web site, which is preparing convenient tools for Zoom PS-04 Pattern Editor and Song Editor. You can purchase from following site. http://www.soundside.de/
NOTE: Zoom Corporation and above site's operator have no business relationship. Zoom Corporation is just introducing this site only for end user's convenience. So, Zoom Corporation cannot support any trouble between above operator and user. Also, Zoom Corporation cannot support any trouble, happened by using introduced software/tools.
|
 |
| A: |
SmartMedia is a general memory card for digital cameras. You can purchase it at computer shops. You may also able to find some net-stores. If you cannot find it, please ask Zoom distributor in your country.
|
 |
| A: |
Because the effect algorithms assume a line connection, the sound when connected to a guitar amp will not be as intended. You should use headphones or a regular audio system for playback and monitoring.
|
 |
| A: |
The SmartMedia card has a write-protect sticker attached. Remove the sticker and try again.
|
 |
| A: |
Before using your CD writing software, you must convert the sampling frequency to 44.1 kHz which is the standard used for CD audio. Use a freeware waveform editor or other suitable software to convert the sampling rate.
If you use the CD writing function of Windows Media Player, the sampling frequency conversion step is not required. To use Windows Media Player, proceed as follows.
Windows Media Player 9
1. From the File menu, open the "Copy" submenu and select "Copy to Audio CD".
2. Drag and drop the audio data into the "Items to Copy" area.
3. When you click the "Copy" button, a wizard screen comes up. Follow the on-screen instructions to write the CD.
Windows Media Player 10
1. From the File menu, open the "CDs and Devices" submenu and select "Burn Audio CD".
2. Drag and drop the audio data into the "Burn List" area.
3. When you click the "Start Burn" button, a wizard screen comes up. Follow the on-screen instructions to write the CD.
|
 |
| A: |
The built-in mics may pick up physical vibrations such as very low frequencies as distortion. When setting up the PS-04, avoid locations that will be subject to strong vibrations such as near speakers or a drum set. It may also be advisable to place the unit on a soft cloth or similar, to reduce the influence of vibrations.
|
|
|

|

|