|
RFX-2200/RFX-1100
|
|
| A: |
As all power of the signal processor should be concentrated to keep highest quality of each effect, you cannot use two or more effects simultaneously. But exceptionally, some of popular combination, for example Delay + Reverb, is programmed and possible to choose.
|
|
| A: |
Yes, a microphone can be connected directly to the combined XLR/phone connector on the front panel. If you connect an instrument such as a keyboard to the rear panel at the same time, you can use the unit as a Vocoder.
|
|
| A: |
No, because the unit does not provide the phantom power supply required by a condenser microphone. You should use a dynamic microphone.
|
|
| A: |
Input/Output level is +4dBm well matching to mixer etc. Also, it is possible to use for send/return terminal of guitar amplifier.
|
|
| A: |
Concerning the digital equipments, noise may be standing out to the ear when the input level is not suitable. Please make input level proper watching the blink of input level indicator. Proper level is that indicator becomes red, when the signal level is maximum.
|
|
| A: |
Guitar cannot be connected directly, since input impedance does not match. Please connect guitar through any equipment witch has low output impedance, like guitar effects processor.SEND/RETURN of guitar amplifier can be connected directly.
|
|
| A: |
It is the effect used when "Mix down" to stereo track from multi track, or mastering the stereo track finally. Using multi-bank compressor/equalizer, the stereo track can be more powerful or comfortable for home use/portable audio equipment. You can make impressive sound quality as commercial CD.
|
|
| A: |
The RFX-2200 is supporting full MIDI function, in MIDI IN/OUT/THRU. But the RFX-1100 does not correspond.
|
|
| A: |
The rack-mount brackets are attached to the sides of the unit with three screws each. With a Phillips screwdriver, the brackets can be removed easily.
|
|
| A: |
There is no dedicated software for the RFX-2200, but the software for the RFX-2000 model (called "RFX-2000ED") can be used to edit patches. You can download the RFX-2000ED software here.
*Operation of "RFX-2000 ED" has been verified also under Windows 2000 and Windows XP.
*For connection of the RFX-2200 to the computer, a MIDI interface is required.
|
|
| A: |
Yes, by using the separately available foot switch FS01. Connect the FS01 to the BYPASS jack on the rear panel of the unit with a 1/4" standard phone plug cable.
|
|
|
|
|
Common Question