FAQ
RFX-1000
RFX-1000
Are two or more effects can be used simultaneously?
As all power of the signal processor should be concentrated to keep highest quality of each effect, you cannot use two or more effects simultaneously. But exceptionally, some of popular combination, for example Delay + Reverb, is programmed and possible to choose.
Can RFX1000/2000 be used as an effect for Mic?
The Mic can be connected directly to "Mic In" on the front panel. When musical instruments (keyboard etc.) are also connected to the line input in rear panel, VOCODER effect can be played.
Does Input/Output level correspond to +4dBm, as recording standard?
Input/Output level is +4dBm well matching to mixer etc. Also, it is possible to use for send/return terminal of guitar amplifier.
Even noise is standing out.
Concerning the digital equipments, noise may be standing out to the ear when the input level is not suitable. Please make input level proper watching the blink of input level indicator. Proper level is that indicator becomes red, when the signal level is maximum.
Can the RFX1000/2000 be used as an effect for Guitar?
Guitar cannot be connected directly, since input impedance does not match. Please connect guitar through any equipment witch has low output impedance, like guitar effects processor.
SEND/RETURN of guitar amplifier can be connected directly.
What is the Mix down or Mastering effect?
It is the effect used when "Mix down" to stereo track from multi track, or mastering the stereo track finally. Using multi-bank compressor/equalizer, the stereo track can be more powerful or comfortable for home use/portable audio equipment. You can make impressive sound quality as commercial CD.
Does RFX-1000/2000 correspond to MIDI?
RFX-2000 is supporting full MIDI function, in MIDI IN/OUT/THRU. But RFX-1000 does not correspond.
What becomes possible using RFX-2000ED, editor software?
8 extra effects that cannot choose by RFX2000 itself, and the library/backup function that can control effect data on PC, will be enabled. Moreover, all parameters can be edited graphically in detail.
The effect prepared only for high-end models, such as 31 band equalizer, custom-made reverb, 20 tap delay, and 3 band compressor, are contained in extra effects.
Does RFX-2000ED correspond to both Windows and Macintosh?
Both Windows and Macintosh version are prepared. You need Windows 95/98 (Pentium 166MHz or later, or Mac OS later than System 7.5.3 or Mac Os 8.0. In case of Macintosh, you need OMS.
Is it possible to use the software "RFX2000ED" on the Windows2000 or XP?
It is possible, however installer (setup.exe) contained in supplied CD-ROM is not working. So please install RFX2000ED by following method.
1)Display all contents of supplied CD-ROM.
2)One file "setup.exe" and two folders "english" and "japanese" are available.
3)Copy "english" folder to any drive/folder.
4)Re-name it to "RFX2000ED".
5)Open this folder and make shortcut of "RFX2000ED.exe" on the desktop.
6)Double Click this shortcut and then "RFX2000ED" starts.
Note: Please refer Windows help how to re-name or how to make shortcut.
Can I switch effects on and off with my foot during a performance?
Yes, by using the separately available foot switch FS01. Connect the FS01 to the BYPASS jack on the rear panel of the unit with a 1/4" standard phone plug cable.
