Cross-Platform Communications Central Zoom UAC-8 USB 3.0 SuperSpeed Audio Converter for Mac and PC
There’s a whole new world of possibilities for Mac and PC Creators — high-speed, high-resolution, and low-latency. Upgrade your rig with the rackmountable UAC-8, and add 18 inputs and 20 outputs to your USB 3.0-equipped Mac or Windows computer—even your iPhone/iPad.* Plug in a microphone, line-level device, or instrument and start bringing your ideas to life, or take the UAC-8 onstage to enable high-res audio playback, all the way up to 24-bit/192k.
* Apple Camera Connection kit or Lightning to USB Camera Adapter required
USB 3.0 SuperSpeed
The USB 3.0 SuperSpeed transfer protocol used by the UAC-8, with a speed of 2.0 ms roundtrip @ 96kHz / 32 samples, is ten times faster than USB 2.0 and six times faster than FireWire 800. That not only ensures low latency, it provides a data stream that's unaffected by computer jitter (slight variations in timing), so there's no need to connect an external master clock source.
The Hardware
INPUTS
The UAC-8 provides a wide variety of both analog and digital connectors. Eight front panel combo XLR/TRS inputs accept mic- and line-level signals, and you can even plug instruments directly into Inputs 1 and 2. Dedicated input gain controls and Clip LEDs make it easy to set optimum input levels, and a Phantom Power switch enables the use of condenser microphones.
OUTPUTS
The UAC-8 has dual balanced analog TRS output jacks for connection to monitors, and there are also 8 discrete balanced TRS analog line outputs for multichannel monitoring or connection to external effects devices. A large front-panel Output knob offers fast control over output level, and there are two independent ¼" stereo headphone jacks, each with its own dedicated volume control, for private monitoring.
DIGITAL I/O
8 ADAT and stereo S/PDIF digital inputs/outputs allow for the connection of up to 10 external channels, and built-in Word Clock enables easy integration into any system. In addition, MIDI In and Out is provided to allow interfacing with devices such as electronic keyboards and drum machines.
Upsampling, Standalone Mode
The UAC-8 uses high-end components such as the AKM AK5388 analog-to-digital converter and AKM AK4413 digital-to-analog converter. In addition, the UAC-8 performs 4-times upsampling during both analog-to-digital and digital-to-analog conversion. In other words, when the sampling frequency is set to 44.1kHz or 48kHz, the UAC-8 processes the signal at high resolution 176.4kHz or 192kHz.
For A/D conversion, this means less aliasing noise; for D/A conversion, this means increased clarity and fidelity.
In standalone mode, the UAC-8 can be used as an 8-channel mic preamp and analog-to-digital or digital-to-analog converter without being connected to a computer.
Extend your capabilities with software
UAC-8 MixEfx is a free Macintosh and Windows compatible application designed specially by Zoom for the UAC-8. It provides a comprehensive onscreen mixer, with independent level, phase reversal, and panning control for each channel. UAC-8 MixEfx also allows you to freely route all inputs to all outputs and to create custom mixes. In addition, MixEfx features effects like reverb and echo, and complete mixes can be stored in three different memory slots, allowing instant recall. 
State of the art editing with every interface
The Zoom UAC-8 comes with a free download license for Sternberg’s Cubase LE music production software, providing not just the ability to capture incredible high-resolution / low-latency audio in every box, but to do spectacular things with it.
Take your recordings to a more professional level. Steinberg’s powerful and state-of-the-art audio software used by creators around the world now comes with every Zoom UAC-2 and UAC-8 purchase.
Currently shipping with:
Cubase LE9 for Mac OS X 10.11/10.12/10.13 and Windows 7/8.1/10
For information on license activation and upgrades, visit our Steinberg Software support page.
Features at a glance
- 18‐in/20‐out USB 3.0 SuperSpeed audio interface
- Standalone mode allows use as an 8-channel mic preamp and A/D or D/A converter without connection to a computer
- Support for recording and playback of up to 24‐bit/192kHz high‐resolution audio
- Low latency audio streaming
- 8 combo balanced XLR/TRS analog input connectors accept both mic and line‐level signal
- High‐performance mic preamps with up to +60dB of amplification
- Hi‐Z switches allow direct connection of electric guitar or bass (INPUT1, INPUT2)
- Independent gain controls and clip LEDs for each input
- Switchable +48V phantom power (INPUTS 1‐4, INPUTS 5‐8)
- 10 balanced TRS output jacks for connection to mixers, amplifiers, self‐powered speakers, headphones, or effects devices
- Dual front-panel 1/4" headphone outputs with dedicated volume controls
- Large knob output volume control
- 4x upsampling during A/D and D/A conversion for reduced noise and enhanced fidelity
- Asynchronous transfer system unaffected by computer jitter
- S/PDIF IN/OUT: 2IN / 2OUT, up to 24‐bit/192kHz
- ADAT Optical IN/OUT: 2 IN / 2 OUT at 192/176.4kHz (S/MUX4 compatible), 4 IN/4 OUT at 96/88.2kHz (S/MUX compatible), 8 IN / 8 OUT at 48/44.1kHz
- Word Clock in/out
- Clock source indicator
- MIDI in/out
- Compatible with all popular DAW and streaming software, including Cubase, Logic, Garage Band, Pro Tools, Ableton Live, and others
- Rack-mountable (1U space)
- Robust metal housing
- Works with all USB 3.0-equipped Mac and Windows computers and Apple iPhone/iPad*
* Apple Camera Connection kit or Lightning to USB Camera Adapter required
Accessories
Here's what comes included with the UAC-8:
- Operation manual
- USB 3.0 cable (1m)
- Cubase LE download access code sheet
- Cubase LE startup guide
Downloads
Images
Documents
Software
Specs
| ANALOG INPUTS: INPUTS 1–8 | |
|---|---|
| Connectors: | XLR/TRS combo jacks |
| Input gain: | 0–60 dB (1 dB steps) |
| Input impedance: | 5 kΩ |
| Maximum input level: | +13 dBu (XLR at 0 dBFS) |
| Phantom power: | +48 V |
| ANALOG OUTPUTS: MASTER OUTPUTS | |
| L/R Connectors: | TRS jacks (balanced) |
| ANALOG OUTPUTS: LINE OUTPUTS 1-8 | |
| Maximum output level: | +14 dBu (at 0 dBFS) |
| Output impedance: | 150 Ω |
| ANALOG OUTPUTS: PHONES 1/2 | |
| Connectors: | Standard stereo phone jacks |
| Maximum output level: | +10 dBu |
| Output impedance: | 33 Ω |
| DIGITAL IN/OUT: ADAT OPTICAL | |
| Connectors: | ADAT Optical (lightpipe) |
| DIGITAL IN/OUT: S/PDIF | |
| Connectors: | RCA (coaxial) |
| Supported sampling frequencies: | 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz |
| DIGITAL IN/OUT: WORD CLOCK | |
| Connectors: | BNC |
| Supported sampling frequencies: | 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz |
| Output impedance: | 75 Ω |
| OTHER | |
| Frequency characteristics : | 44.1 kHz: −1.0 dB, 20 Hz–20 kHz |
| Input conversion noise: | Measured EIN: 125 dB (IHF-A) |
| Dynamic range: | AD: 120 dB typical (IHF-A) |
| Sampling frequencies: | 192 kHz, 176.4 kHz, 96 kHz, 88.2 kHz, 48 kHz, 44.1 kHz |
| Bit depth: | 24-bit |
| Interface: | USB 3.0 / 2.0 |
| MIDI IN/OUT: | 5-pin DIN jacks |
| Power supply: | AD-19 DC12V 2A AC adapter |
| External dimensions: | 6.2 in. (D) × 19 in. (W) × 1.8 in. (H) |
| Weight (main unit only): | 4.4 pounds / 2.02 kg |
Note: 0dBm＝0.775Vrms |
|
| Number of recording and playback channels | |
| AUDIO INTERFACE AND STANDALONE MODES: At 44.1 kHz and 48 kHz : | Recording: 18 channels (ANALOG: 8, S/PDIF: 2, ADAT Optical: 8) |
| AUDIO INTERFACE AND STANDALONE MODES: At 88.2 kHz and 96 kHz: | Recording: 14 channels (ANALOG: 8, S/PDIF: 2, ADAT Optical: 4) |
| AUDIO INTERFACE AND STANDALONE MODES: At 176.4 kHz and 192 kHz: | Recording: 12 channels (ANALOG: 8, S/PDIF: 2, ADAT Optical: 2) |
| CLASS COMPLIANT MODE: At 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz: | Recording: 8 channels (ANALOG: 8) |
| UAC-8 System Requirements | |
| Windows: | OS： Windows® 7 SP1 or later / 8 / 8.1 / 10 (32bit/64bit) * Operation is not guaranteed with CPUs from Atom, Celeron or Pentium series or CPUs made by AMD. |
| Mac: | OS： Mac® OS X 10.9.5 or later / 10.10 / 10.11 / 10.12 / 10.13 / 10.14 * Operation is not guaranteed when used with USB hubs or expansion cards. |
| iPhone/iPad: | OS： iOS 7.1 or later * Apple Camera Connection kit or Lightning to USB Camera Adapter required. |
